- Sort by Default Order
The SignalFire Wireless I/O Module acts as a wire replacement that replicates analog and digital signals over a wireless link between a pair of Wireless I/O Modules. The modules are DIN rail mounted and designed to be easy to use. The Wireless I/O Modules can also be used with a standard SignalFire Gateway.
The Tilt Scout is a wireless solid state inclinometer that measures an angle from horizontal with two modes: Hatch detection and Pump Jack detection. The Hatch detection mode enables monitoring of the opening condition (closed, cracked open, opened) of a hatch for environmental and safety concerns. The Pump Jack detection mode detects and reports if it is operating or moving. The Tilt Scout can also be applied to a variety of other applications where there’s a need to detect an angle from horizontal. Operating Temp: -40 to +176°F (-40°C to 80°C) Humidity: NEMA 4X Enclosure Resolution: <0.1 degree Power: Internal battery pack. Field replaceable. Battery Life: Greater than 5 years Data Interface: Wireless – available as Modbus registers at Gateway Reporting: Will report every 10 minutes or immediately after a state change Radio Specifications: • Power: 40 mW • Receive Sensitivity: -109 dB • Encryption: AES 128 bit • Frequency: 902–928 MHz, FHSS, license-free ISM Band Compliant with FCC Part 15 Range: Up to 1/2 mile Intrinsically Safe (pending): Hazardous Location Certified – Class 1 Division 1 is Temp Code T3, Groups C&D. Conforms to UL Std. 913, Certified to Can/CSA Std C22.2 No. 157 Internal Diagnostics: Battery voltage, signal strength, error conditions
The Repeater Node permits extension of the SignalFire Wireless Mesh Network where power is not available. Complete stand-alone system for easy installation.
- Powers sensor and radio for years with an internal battery
- Class 1 Division 1 Intrinsically safe system
- Optional Class 1 Division 1 solar module with integrated charger, battery panel, and mounting bracket
- Costs less than 60ft of installed conduit
- Rugged design for demanding outdoor environments
- Up to 1/2 mile range
- Sensor independent
- 1/2” NPT conduit interface
- Automatically configures as a star or mesh network
- Simple to install and Maintain
Operating Temp: -40 to +176°F (-40°C to 80°C) Humidity: 0% – 100% condensing Enclosure: NEMA 3X rated for outdoor use Power: “D” Cell Lithium battery pack. Field replaceable. Class 1 Division 1 certified. Battery Life: 1–10+ years depending on reporting frequency. Battery Life Examples: 5-second pressure sample interval with a 1-minute reporting interval = 5 years. 2-minute sample and reporting interval = 10+ years Data Interface: Wireless – available as Modbus registers at Gateway Report by Exception: Configurable alarm pressure thresholds, pressure sample rate 5 seconds minimum. Data Update Rates: User-selectable. 5 seconds to 1 hour, typical. Radio Power: 40 mW Receive Sensitivity: -109 dB Radio Frequency: 902–928 MHz, FHSS, licensefree ISM Band Compliant with FCC Part 15 and Industry Canada Range: Up to 1/2 mile Networks: Up to 65,520 separate networks Intrinsically Safe: Class 1 Division 1, Temp Code T3, Groups C&D. Conforms to UL Std. 913, Certified to Can/CSA Std C22.2 No. 157 Internal Diagnostics: Battery voltage, signal strength, error conditions
The Multi-I/O Stick System is designed to connect to a Modbus Stick and provide sophisticated wireless I/O control and monitoring at remote locations. Ideal for Separator, Heater Treater, Plunger Lift and Other Applications.