• The SignalFire Remote Sensing System™ is a flexible adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 3 miles, the system is self installing and self configuring. All the installer has to do is set the check-in frequency using a simple rotary switch, record the radio address, and connect the sensor. This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.
  • The Sentinel-HCSolar is a self contained Class 1 Division 1 Intrinsically Safe solar power system.  It consists of a solar panel with mounting bracket and integrated potted battery and high efficiency solar charger. Bracket mounting kits are available. 
  • The SignalFire Remote Sensing System™ is a flexible, adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 4 miles, the system is self installing and self configuring.  This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.
  • The new DIN Gateway V2 is a wireless 900 mHz Gateway with integrated I/O for easy connectivity to wireless and wired sensors, integrated Ethernet and built-in automation.
  • The Ethernet Interface Module permits direct connection of the SignalFire Wireless Mesh Network to an Ethernet Network. The Ethernet Interface Module has 2 addressable ports and is designed to connect to a standard SignalFire Gateway Stick with little or no configuration necessary.
  • The Field Monitor Display provides in-field access and display of any data without the need for a laptop computer or other visual I/O device. Capabilities:
    • In-field readout of any Gateway data
    • Battery powered display
    • Perfect for local display of tank levels or other field data
  • Intrinsically Safe Wireless Tank Level Monitoring

    The SignalFire Float Scout consists of a magnetostrictive level probe mated with a Sentinel wireless node which creates a wireless link between the sensor and the Gateway. The Sentinel will take level and temperature readings, and send the data (via the SignalFire wireless mesh network) to the Gateway where the data is available via a Modbus RTU or TCP interface. The system is powered by internal lithium batteries or optional C1D1 rated solar package. Sensor data along with node-diagnostic information is available at the Gateway.
  • The Gateway DIN Mount is an integrated device combining a high power SignalFire radio with the gateway electronics in a single DIN mounted package.
  • This rugged, integrated device combines a high-gain antenna with gateway electronics in a single, easily mounted package. Gateway Stick combats a common problem with RF networks, which are increasingly used to monitor and control remote devices over tens or hundreds of square miles. Gateways traditionally have different location requirements for their electronics module and antenna, making it necessary to place them separately. Gateway Stick is a revolutionary solution that combines them in one easy-to-install component.
  • HART to Wireless Adapter The Link Scout is a wireless adapter for loop powered 4-20mA HART instruments allowing HART connectivity with asset management software like PactWare, FieldCare, DeviceCare and most FDT based software. The Link Scout is powered from an internal intrinsically safe battery and wired in parallel to not interfere with the existing 4-20mA loop. It will poll the HART instrument for its dynamic variables and alarm status to then transmit to the SignalFire gateway as Modbus registers. The Link Scout tunnels also all the HART traffic to an asset management software allowing full configuration, calibration and troubleshooting using the manufacturers DTM software. Features Include:
    • Long wireless distance of 2640ft (800m)
    • Supports four (4) HART® instruments in multi-drop mode
    • Can be installed on a live instrument while in service
    • Excellent battery life
    • Transmits to gateway as Modbus registers HART PV, SV, TV, QV & HART diagnostic flag
    • Tunnels all HART data to software like PactWare, DeviceCare, FieldCare
    • 1/2” NPT male connection with potted wiring
  • The SignalFire Remote Sensing System™ is a flexible, adaptive radio networking system that seamlessly integrates analog and digital sensors. With a range of up to 4 miles, the system is self installing and self configuring.  This system compares very favorably, from a cost perspective, with installed conduit at distances of 100 feet or more.
  • The Multi-I/O Stick System is designed to connect to a Modbus Stick and provide sophisticated wireless I/O control and monitoring at remote locations.  Ideal for Separator, Heater Treater, Plunger Lift and Other Applications.